Rear Panel - Panasonic AJ-CVF25GJ Operating Instructions Manual

Parts and their functions

Rear panel

PIC.SIZE (PICTURE SIZE)

Sets the size of the image to be displayed on the LCD monitor.
AUTO :
W hen viewing the screen through the eyepiece unit or flipping up the eyepiece unit and
viewing the screen over the mirror, the images are displayed in a slightly smaller size (approx.
83% of the full-screen size). At all other times, they are images at the full-screen size.
When images are being displayed in the smaller size, the [Green tally], [!], [Amber tally],
[Yellow tally], [TALLY/REC], [BATT] and [SAVE] indicators are displayed at the top and bottom
of the screen.
FULL : I mages are always shown as full-screen displays.
Note
When directly viewing the LCD monitor with the viewfinder barrel unit flipped up or when
rotating the eyepiece unit to the subject side to view the images, images are displayed at the
full-screen size regardless of the PIC.SIZE switch setting.
Protective filter

This is where the protective filter (43 mm [1-11/16 inches] diameter) is installed. (Page 26)
Eyepiece unit release lever

Releases the lock, causing the eyepiece unit to flip up.
Back tally lamp

Lights during shooting, and blinks during warnings.
The back tally lamp is hidden when the lever is set to OFF.
(18)
(continued)


switch

PIC.SIZE
AUTO
FULL

ON
OFF