Cleaning; Cleaning The Housing - Silvercrest SRH 5 B2 Operating Instructions And Safety Instructions

Fault
Interference with the
radio reception .
No automatic
setting of time and
date .
NOTE
► If you cannot solve the problem with the solutions given above, please
contact the Service Hotline (see section Service) .

Cleaning

DANGER
Risk of fatal injury from electrocution!
► Pull out the plug of the mains adapter from the power socket before starting
to clean the device .
CAUTION
Damage to the device!
► To avoid irreparable damage to the device, ensure that no moisture can
penetrate the device during cleaning .
► Do not use caustic, abrasive or solvent-based cleaning materials . These can
damage the surfaces of the device .

Cleaning the housing

♦ Clean the surfaces of the device with a soft, dry cloth .
♦ Use a lightly moistened cloth and a mild detergent to remove stubborn dirt
residues .
SRH 5 B2
Possible cause
Radio reception is too
weak .
The RDS signal is not
available .
Remedy
Pull out the telescopic aerial
completely . Try to improve reception
by moving the telescopic aerial
or by moving the radio to another
location .
Pull out the telescopic aerial
completely . Try to improve reception
by moving the telescopic aerial
or by moving the radio to another
location .
0
0
0
0
GB │ IE 67 ■
│