Silvercrest SBH 5.0 A1 Operating Instructions Manual page 23

A1" and establish the connection. Once the connection
has been established, there are two short beeps and
the headset says:
 If you are prompted for a PIN, enter "0000".
While a device is connected, the LED (2) flashes white
briefly once about every 10 seconds.
If the connection to the mobile phone is lost, the LED (2)
flashes white once about every 5 seconds.
Bring the mobile phone back into the range of the
headset or power it on in order to automatically re-
establish the connection to the headset. In some mobile
models, you will need to initiate the re-connection from
your phone. Only one mobile phone can be actively
connected to the headset at the same time.
If you wish to connect another mobile phone to the
headset, repeat the pairing process as described above.
Connected
SilverCrest SBH 5.0 A1
English - 21