Advertisement
fig 7
3.7 Install the new compound rest screw
retainer using the screws removed from
the original.
fig 10
3.10 Install the digital display retaining
screws (provided) (fig 10a), then install
the spacer washer provided and the
compound rest feed handle.
4.
INSTALLATION 2
Installing the Cross Slide digital display.
fig 11
4.1 Remove the two socket head cap
screws that retain the cross slide feed
nut.
© Jack Sealey Limited
fig 8
3.8 Install the digital display.
a
fig 12
4.2 Remove the cross slide feed nut (fig
12a) by turning the cross slide feed
handle clockwise.
Original Language Version
fig 9
3.9 Install one of the small setscrews
provided. Be sure the screw fits tightly
and correctly into the slot on the feed
screw.
fig 13
a
4.3 Remove the cross slide feed
handle (fig 13a), the spacer washer
and the dial (fig 13b).
b a
SM3002DFD
Issue: Issue: 2(L) - 12/05/16
Advertisement
