Table of Contents
Advertisement
Care and cleaning
Dispenser Drawer Area
Detergent and fabric softener may build up in the dispenser drawer. Residue
should be removed once or twice a month.
• Remove the drawer by first pulling it out until it stops. Then reach back into
the rear of the drawer cavity and press down firmly on the lock tab, pulling
out the drawer.
• Remove the insert from the dispenser drawer. Rinse the insert and drawer
with hot water to remove traces of accumulated laundry products.
• To clean the drawer opening, use a small brush to clean the recess. Remove
all residue from the upper and lower parts of the recess.
• Return inserts to the proper compartments. Replace the dispenser drawer.
• To reduce buildup in the Dispenser Drawer area:
Use only HE
High-Efficiency
detergent.
Moving and Storage
Ask the service technician to remove water from drain pump and hoses. Do not store the unit where it will be exposed
to the weather. When moving the unit, the tub should be kept stationary by using the shipping bolts removed during
installation. See Installation Instructions in this manual. If these parts are not available, they can be ordered by visiting
our Website at GEApplianceparts.com or by calling GE Appliances at 877.959.8688. In Canada, visit your local
GE Appliances parts distributor or call 800.661.1616 or GEAppliances.ca/en/products/parts-filters-accessories.
Long Vacations
Be sure water supply is shut off at faucets. Drain all water from hoses and water filter pump area if weather will be
below freezing.
49-3000230 Rev 0
17
Hide quick links:
Advertisement
Table of Contents
