Printer Reset; Printer Status; Printer Paper Precautions; Safety Information - Huawei CV80 Quick Start Manual

You can use Huawei Share to print pictures stored on your Huawei/Honor phone.
1) Press and hold the printer's Power button for three seconds to power on the printer.
2) Open Gallery on your phone and select the picture you want to print. Touch
touch Huawei Share search and find your printer in the list.
3) When connecting to your printer for the first time, you must press the printer's Power
button for one second to confirm the connection.
4) Begin printing.
This feature is only available for phones running EMUI 9.0.1 or later.

7. Printer reset

Press and hold the printer's Power button for 9 seconds to force reset and power off the
printer.

8. Printer status

Status Indicator
Color
Slightly faster
flashing green
Slow flashing
green
Steady green
Fast flashing green Printing
Steady red
Off
If the power indicator is flashing red, please charge the printer. The power indicator
will turn off after the printer automatically powers off.

9. Printer paper precautions

• Use the printer paper as quickly as possible after opening.
• Avoid exposure to direct sunlight and low temperatures.
• Do not use non-standard printer paper as this may cause device damage.
• Do not fold or damage the printer paper.

Safety Information

Before using the device, read and comply with the following precautions carefully to
ensure optimal device performance and avoid danger or violation of laws and
regulations.
• Do not use the device at locations where the use of wireless devices is prohibited due
to potential interference with other electronic devices, which may cause safety
hazards.
In clinics and hospitals where the use of wireless devices is prohibited, please comply
•
with the regulations and power off the device.
• Some wireless devices may interfere with implantable medical devices and other
medical equipment, such as pacemakers, cochlear implants, and hearing aids.
Consult the manufacturer of your medical equipment for more information.
• When using the device, keep it at least 15 cm away from medical devices.
• Avoid dusty, damp, or dirty environments. Avoid magnetic fields. Using the device in
these environments may result in circuit malfunctions.
• Keep the device away from appliances with strong magnetic or electrical fields, such
as microwave ovens and refrigerators.
• Do not use the device during thunderstorms to avoid any lightning-related damage or
injury.
• Use the device at temperatures between 5°C and 40°C, and store the device and its
accessories at temperatures between –30°C and +70°C. Extreme heat or cold may
damage the device.
• Do not place the device in places that are easily exposed to direct sunlight such as on
a car's dashboard or on a window sill.
• Do not place the device near exposed heat or ignition sources (such as heaters,
microwaves, ovens, stove fire, candles, and so on).
Description
Powering on or
pairing
Standby mode
Normal operation
An error has
occurred
Power off
Power Indicator
Color
Flashing red Low battery
Steady red Charging
Flashing
Ready to connect
green
Fully charged or powered
Steady green
on and operational
Flashing red
Printer is updating
and green
3
English
,
Description