C.2 DIO Programming
BOXER-8331AI utilizes the FINTEK 81866 chipset as its Digital I/O controller. This section
details procedures to complete configuration of the chipset, as well as AAEON initial
Watchdog Timer program which can be customized to fit your application.
There are three steps to complete the configuration setup.
Step 1
Enter the MB PnP Mode
Step 2
Modify the data of configuration registers
Step 3
Exit the MB PnP Mode. Undesired results may occur if the MB PnP Mode is
not exited normally.
Note: These three steps are the same for programming the Watchdog Timer
Appendix C – Digital I/O Information
88