Advertisement
Figure 7
Reinstall the output boards and the pump/
common board. Secure the flex cables onto the
Network VP/VP
conversion board.
E
See Figure 7.
Figure 9 - 89-7519 Installation
If not already installed, install the modem tray
onto the Network VP/VP
TM. Match the
E
hinges together and swing the tray open. The
hinges are designed to snap into place when
opened. See Figure 9.
Figure 11 - 102-0104 / 102-8568 Installation
Snap the large protective cover over the TM. Be sure the tabs lineup.
Figure 8 - Determine Which Modem You Have
The LTC Plus wireline satellites use one of
three possible modems. There are two ways to
determine which modem you have:
1. Look at the sticker on the back of the
modem. Choices are:
• 89-7519
• 102-0104
• 102-8568
Figure 10
Slide the modem onto the modem tray. Press
onto the board firmly until it snaps securely
into place. Connect the short 16-pin ribbon
cable between the modem and TM. See Figure
9 and Figure 14 item B.
Figure 12
Place the modem onto the large protective cover.
Secure with the four included screws.
Connect the short 16-pin ribbon cable between the modem and TM.
•
2.
The 89-7519 modem has a serial port.
The 102-0104 / 102-8568 modems do
not.
For 89-7519:
See Figures 9 and 10 .
For 102-0104 / 102-8568:
See Figure 11 and 12.
serial port
89-7519 modem
no serial port
102-0104 / 102-8568 modems
Advertisement
