Advertisement
Figure 13
Install the Network VP/VP
E
plastic satellite cabinet. Install cable assembly
D, E, F and G as shown in Figure 14. Turn the
satellite ON and check for proper operation.
B - Modem Cable, 4.75 Inch, 16-Pin Ribbon
Cable
D - 4-Wire Power Cable Assy. from Power
Supply.
E - Conversion Board to Distribution Board
Power Cable, 5.5 Inch 4-wire Cable Assy.
F - Conversion Board to Distribution Board
Ribbon Cable Assy., 5.75 Inch, 16-Pin
Ribbon Cable
G - TM to Conversion Board Ribbon Cable,
12 Inch, 40-Pin Ribbon Cable
!
IMPORTANT: Although the cable
assemblies are keyed, it is possible to install
them incorrectly. Verify the key is as shown in
Figure 14.
© 2015 The Toro Company • Irrigation Division • www.toro.com
Figure 14
TM onto the
B
G
D
E
Send items for recycling or proper disposal to:
The Toro Company
Attn: Controller Repair
5825 Jasmine St.
Riverside, CA 92502-0489
Part Number 373-0501 Rev. C
F
Advertisement
