Epson IR-700 User Manual page 19

Be sure to push the plug of the power cable all the way into the AC inlet of
this product.
Always unplug the power cable from the power outlet before unplugging it
from the AC inlet of this product.
When disconnecting the power cable, hold the plug firmly. Do not tug on
the cable itself.
Do not connect the cables in ways other than those specified in this
manual. Different connections may cause equipment damage or fire.
Make sure that the total power requirements of all devices receiving power
from this product do not exceed the power limitation. Otherwise, the
product may become damaged. See the Specifications at the beginning
of the IR-700 Technical Reference Guide for detailed information on the
power capacity of the product.
Be sure to use this product with the rear cover attached. If it is not attached,
foreign objects may enter this product, causing fire or equipment damage.
Do not use the unit in locations subject to high humidity or dust levels.
Excessive humidity and dust may cause paper jams and other problems,
such as fire, or electric shock.
Do not use the product where inflammable fumes of gasoline, benzine,
thinner, or other inflammable liquids may be in the air. Doing so may cause
an explosion or fire.
Be careful when transporting, opening, and incinerating the package. You
may cut your finger on the edge of the cardboard.
Never hold this product by the rear cover, the LCD, the POS keyboard, or the
MSR. The product may break and fall onto the floor, causing possible injury.
Be sure to set this product on a firm, stable, horizontal surface. The product
may break or cause injury if it falls.
Never clean the product with alcohol, benzine, thinner, or other such
solvent. Doing so may damage or break parts made of plastic or rubber.
To ensure safety, unplug this product before leaving it for an extended period.
Do not stand on or place heavy objects on top of this product. Equipment
may fall or collapse, causing breakage and possible injury.
Do not drop, bump, or otherwise subject this product to strong vibration or
impact. The glass of the LCD may break and cause possible injury, or the
product may become damaged.
Do not use aerosol sprayers containing flammable gas inside or around this
product. Doing so may cause fire.
❏
TM-printer
When a power cable for the TM printer is connected, do not short-circuit its
connector pins. Because the connector pins are uncovered, they may short-
circuit when the connector is not connected to the printer.
The print head can be very hot during and immediately after printing. If
you need to touch it, wait until it cools down. Touching it before that may
cause burns.
Be careful of the autocutter blade of the printer.
❏
Customer display
Do not use excessive force to rotate the customer display or to change the
angle of it. Doing so may break the customer display or the support.
❏
MSR
Do not use magnetic stripe cards that are chipped, cracked, dirty, wet, or
have foreign matter stuck to them. Doing so may cause deterioration of
the mechanical functions.
English
IR-700 User's Manual 5