Table of Contents
Advertisement
Meaning of Status LEDs
Status
Turning on
Communicating
Turning off
No battery power
Pairing mode
Error
Hardware error
Please refer to the in-app help for additional information about the LED display.
2. Charging the Battery
Before using your product for the first time, make sure the battery is fully charged. To charge
the product, insert the USB plug into a power source.
You can use:
• Optional USB AC adapter (part number: E12E204001)
• Computer (using a USB port)
Turn off the product before charging.
The orange LED turns on when the product is charging and off when charging is
complete.
NOTE
• Stop charging the product even when charging is not finished after 3 hours.
• The battery may not charge correctly if you are using a charger other than the specified
AC adapter.
• Charging may not finish if your computer is in Sleep or Stand-by mode.
• Connect the micro USB charging cable directly to your computer, not to a USB hub.
3. Connecting to a Mobile Device
To use this product, you need to pair it to a mobile device using a Bluetooth
connection.
1
Place the product within 3 feet (1 m) of the mobile device.
2
With the product turned off, hold down the power button for at least five
seconds to turn on the product and enter pairing mode.
When the product is in pairing mode, the status LED flashes blue and red
alternately.
3
Turn on Bluetooth on your mobile device.
Example: [Settings] - [Bluetooth] - [ON]
4
On your mobile device, tap "MT + last 5 digits of the serial number" in the list
of detected Bluetooth devices.
(Example: MT12345)
When pairing is complete:
iOS, the status LED flashes blue twice every two seconds.
Android, the status LED continues flashing blue and red alternately. Your mobile
device displays "MT + last 5 digits of serial number" as a detected device.
NOTE
The serial number is printed on the sticker on the back of the product.
If you plan to use the product with different mobile devices, you'll need to pair again.
The blue LED turns on for one second and flashes
once every two seconds.
The blue LED flashes twice every two seconds.
The blue LED turns on and then turns off.
The red LED flashes once every 5 seconds.
When turning on, the blue LED is on for one second,
then the red LED flashes once.
The blue and red LED flash alternately.
The red LED flashes once a second.
The red LED turns on for five seconds and then
turns off for half a second repeatedly.
Micro charging USB cable
(AC adapter not included)
Display
Advertisement
Table of Contents
