Specifications - Epson M-Tracer M-S751 Start Here Manual

Table of Contents

Advertisement

10
Pinch the attachment, then slide the product off of the attachment.
11
Slide the attachment off of the grip.
Attachment
Shaft
• The swing measurement steps and the LED display may vary depending on the Epson
M-Tracer For Golf version.
Refer to the Help section of Epson M-Tracer For Golf for the latest information.
• When the red LED flashes once per second, follow the on-screen instructions in the app to
troubleshoot the issue.
• When the red LED is on for 5 seconds, then off for half a second, turn your product off then on.
• When the product operation is unstable, push the reset button.
To clean your product, wipe it with a soft, dry cloth. Do not use chemicals or
detergent.
7. Viewing the In-app Help
For details on using the app, see the in-app Help section:
1
Tap Menu at the top left of the Analysis screen.
2
Tap Help.

8. Specifications

Communication method
Communication distance
Operation time
Built-in battery
Charging method
Charging time
Operating temperature range
Storage temperature range
External dimensions
Weight
*1 The communication distance varies depending on the surrounding environment and the
performance of the Bluetooth device.
*2 The operation time conditions are in compliance with our measurement conditions.
*3 The charging time will increase or decrease in accordance with the usage conditions of the
charging battery. Charging may take about 3 hours from the fully discharged state.
*4 50 to 95 °F (10 to 35 °C) during charging (charge the battery at room temperature as much
as possible).
Certification Information
Contains Transmitter Module FCC ID: SQK-MBH7BTZXXC2
CAN ICES-3 (B) / NMB-3 (B)
Contains Transmitter Module IC: 337L-MBH7BTZXXC2
FCC /IC Notices
This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of FCC Rules and Industry Canada
license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation
of this device.
Grip
Bluetooth 2.1+EDR Class 2
Approximately 30 feet (10 m) with no obstructions*
Approximately 4 hours*
Lithium polymer rechargeable battery
USB bus power (+5 V DC)
Approximately 2 hours*
32 to 104 °F (0 to 40 °C)*
-4 to 113 °F (-20 to 45 °C)
2 in. D x 1 in. W x 0.6 in. H (50 mm D x 27 mm W x 16 mm H)
Approximately 0.5 oz (15 g)
2
3
4
1

Advertisement

Table of Contents
loading

Table of Contents