System Reset; Power On/Off; Reset Switch - Sanyo MBC-550 Series User Manual

SYSTEM RESET
The operating system may be reset by two methods:
1• Power On/Off
Each time power is applied, the system will restart.
This is referred to as a "cold boot". All data not
saved to disk is lost upon resetting the system.
2. RESET Switch
The system may be reset by pushing the RESET switch
located on the left rear edge of the keyboard. All data
not saved to disk is lost upon resetting the system.
The power remains on when you use the RESET switch.
This is reffered to as a ,fcold boot".
If you encounter an error that results in making the
keyboard inoperative, you must reset the system.
Note: Reset the system only when it is definitely
necessary. Do not try to reset too quickly in rapid
successions.
1-35