Advertisement
• The batteries are new, high-quality, name brand batteries
GB
to reduce the chance of battery leakage.
• Make sure the AA batteries or Li-ion rechargeable pack are
in proper working condition. If in doubt, try installing new
batteries.
• Be sure to keep the laser dry.
• If the laser unit is heated above 50 ˚C (120 ˚F), the unit will
not turn ON. If the laser has been stored in extremely hot
temperatures, allow it to cool. The laser level will not be
damaged by using the Power/Transport Lock switch before
cooling to its proper operating temperature.
The Laser Beams Flash
The lasers are designed to self-level up to an average of
4° in all directions. If the laser is tilted so much that the
internal mechanism cannot level itself, the laser beams will
fl ash indicating that the tilt range has been exceeded. THE
FLASHING BEAMS CREATED BY THE LASER ARE NOT
LEVEL OR PLUMB AND SHOULD NOT BE USED FOR
DETERMINING OR MARKING LEVEL OR PLUMB. Try
repositioning the laser on a more level surface.
Specifi cations
Light Source
Laser Wavelength
Laser Power
Working Range
Accuracy - all lines and dots, except down dot
Accuracy - down dot
Power Source
Operating Temperature
Storage Temperature
Environmental
Detector
14
The Laser Beams Will Not Stop Moving
The laser is a precision instrument. Therefore, if it is not
positioned on a stable (and motionless) surface, the laser will
continue to try to fi nd level. If the beam will not stop moving, try
placing the laser on a more stable surface. Also, try to make
sure that the surface is relatively fl at, so that the laser is stable.
Service and Repairs
Note: Disassembling the laser level will void all warranties
on the product.
To assure product SAFETY and RELIABILITY, repairs,
maintenance and adjustment should be performed by
authorized service centers. Service or maintenance
performed by unqualifi ed personnel may result in a risk
of injury. To locate your nearest DeWALT service center,
go to http://www.dewalt.eu.
DCE0825R
Laser diodes
630 – 680 nm visible
≤1.0 mW CLASS 2 LASER PRODUCT
15 m (50')
50 m (165') with Detector
±3 mm per 10 m (±1/8" per 33')
±4 mm per 10 m (±5/32" per 33')
4 AA (1.5V) size batteries (6V DC)
or 10.8V DeWALT Battery Pack
-10°C to 50°C (14°F to 122°F)
-20°C to 60°C (-5°F to 140°F)
Water & Dust Resistant to IP65
DE0892
DCE0825G
510 – 530 nm visible
30 m (100')
50 m (165') with Detector
DE0892G
E
15
Advertisement
