Starting And Stopping The Engine - Toro FP Series Operator's Manual

Adding Water with the Tank Removed
1. Detach the valve coupler (Figure 10).
Figure 10
1. Shutoff valve
2. Female coupler
2. Remove the water tank from the frame by pulling up
on the elastic tank latch (Figure 11).
g019702
1. Elastic tank latch
3. Fill the tank with water, assemble it to the frame, and
attach the coupler.
3. Male coupler
4. Sprinkler manifold
1
Figure 11
Starting and Stopping the
Engine
Starting the Engine
1. Move the engine switch to the On position (Figure 12).
g019703
1. Engine switch
2. Move the fuel valve to the On position (Figure 13).
1
1. Fuel valve
3. Move the choke lever to the left if you are starting a
cold engine (Figure 14).
10
1
Figure 12
g019704
Figure 13