Table of Contents
Related Manuals for Toro 22472
Summary of Contents for Toro 22472
- Page 1 Form No. 3364-916 Rev A Trench Filler Compact Utility Loader Model No. 22472—Serial No. 310000001 and Up To register your product or download an Operator's Manual or Parts Catalog at no charge, go to www.Toro.com. Original Instructions (EN)
-
Page 2: Table Of Contents
Introduction Contents The trench filler is an attachment designed for use on Toro compact utility loaders to fill trenches dug by a trencher with the loose soil left by the trenching process. Introduction..............2 Read this information carefully to learn how to operate Safety ................ -
Page 3: Safety
Safety WARNING When the engine is off, attachments in the raised Improper use or maintenance by the operator or position can gradually lower. Someone nearby may owner can result in injury. To reduce the potential be pinned or injured by the attachment as it lowers. for injury, comply with these safety instructions and Always lower the attachment lift each time you shut those in the traction unit Operator’s Manual . -
Page 4: General Safety
The following list contains safety information specific to Operation Toro products or other safety information that you must • Do not put hands or feet near or under rotating know that is not included in the ANSI or ISO standards. -
Page 5: Stability Ratings
• To ensure the best performance and safety, purchase only genuine Toro replacement parts and accessories Safety decals and instructions are easily to keep the Toro all Toro. Do not use “Will Fit” visible to the operator and are located replacement parts and accessories as they could near any area of potential danger. -
Page 6: Product Overview
A selection of Toro approved attachments and accessories are available for use with the machine to enhance and expand its capabilities. Contact your Authorized Service Dealer or Distributor or go to www.Toro.com for a list of all approved attachments and accessories. -
Page 7: Operation
Operation Refer to your traction unit Operator’s Manual for more information on installing and removing attachments on your traction unit. Important: Always use the traction unit to lift and move the attachment. Filling a Trench g013188 Figure 4 1. Start the engine. 2. -
Page 8: Maintenance
Maintenance Recommended Maintenance Schedule(s) Maintenance Service Maintenance Procedure Interval • Check the bolts and nuts securing the auger. Before each use or daily • Grease the auger bearings. Every 200 hours • Adjust the skids as needed. Yearly or before storage •... -
Page 9: Storage
Storage 1. Before long term storage, wash the attachment with mild detergent and water to remove dirt and grime. 2. Grease the auger bearings. 3. Check and tighten all bolts, nuts, and screws. Repair or replace any damaged or worn part. 4. -
Page 10: Troubleshooting
Troubleshooting Problem Possible Cause Corrective Action The attachment does not operate. 1. A hydraulic coupler is not completely 1. Check and tighten all couplers. connected 2. A hydraulic coupler is damaged. 2. Check the couplers and replace any that are damaged. 3. - Page 11 Notes:...
- Page 12 Countries Other than the United States or Canada Customers who have purchased Toro products exported from the United States or Canada should contact their Toro Distributor (Dealer) to obtain guarantee policies for your country, province, or state. If for any reason you are dissatisfied with your Distributor’s service or have difficulty obtaining guarantee information, contact the Toro importer.