Philips sonicare AirFloss Ultra User Manual page 11

Automatic shut-off function
The AirFloss automatically turns off if it has not been used for one
minute.
Cleaning
If the AirFloss Ultra becomes clogged, or to clean the inside of the
AirFloss, fill the reservoir with warm water and press the activation
button until the reservoir is empty.
Do not clean the nozzle, handle or charger in the dishwasher.
Do not use cleaning agents to clean the appliance. The formulation
or strength of some agents may damage the appliance.
Handle and nozzle
1 Remove the AirFloss Ultra nozzle from the handle. Rinse the
nozzle after each use to eliminate the residue left in it. (Fig. 16)
2 Open the reservoir and rinse it under a faucet to eliminate residue.
(Fig. 17)
Tip: You can also use a cotton swab to wipe the reservoir and
remove the remaining residue.
Note: Do not immerse the handle in water.
Note: Failure to remove residue from the nozzle or reservoir may
result in an unhygienic condition.
3 Wipe the entire surface of the handle with a damp cloth. (Fig. 18)
Charger
1 Unplug the charger before you clean it.
2 Wipe the surface of the charger with a damp cloth.
Storage
If you are not going to use AirFloss Ultra for an extended period of
time, follow the steps below.
1 Open the cover of the reservoir and empty it.
2 Press the activation button until no more spray comes out of the
nozzle.
3 Unplug the charger.
11
English