Philips sonicare AirFloss Ultra User Manual page 12

12
English
4 Clean AirFloss Ultra nozzle, handle and charger. Refer to chapter
'Cleaning'.
5 Store AirFloss Ultra in a cool, dry place away from direct sunlight.
Recycling
- Do not throw away the product with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment.
- This product contains a built-in rechargeable battery which shall
not be disposed of with normal household waste. We strongly
advise you to take your product to an official collection point or a
Philips service centre to have a professional remove the
rechargeable battery.
- Follow your country's rules for the separate collection of electrical
and electronic products and rechargeable batteries. Correct
disposal helps prevent negative consequences for the
environment and human health.
Please note that this process is not reversible.
1 To deplete the battery, repeatedly press the activation button until
the AirFloss no longer produces any bursts of air. (Fig. 20)
2 Remove the AirFloss nozzle from the handle. (Fig. 21)
3 Firmly grab the handle with one hand at the top and one hand on
the bottom. (Fig. 22)
4 Snap the handle into two parts. (Fig. 23)
Note: This step requires a good amount of physical force. The top
and bottom half of the handle should be separated once you snap
the handle.
5 Remove the bottom half of the handle. (Fig. 24)
6 Cut all 6 wires on the internal component with scissors. (Fig. 25)
7 Completely pull apart the internal component from the top part of
the handle. (Fig. 26)
8 The battery is located inside the top half of the handle. Remove
the battery and dispose of it properly (not in household waste).
(Fig. 27)