Table of Contents
Advertisement
Place the PDU on the guide rails. Secure the PDU to the rack using M6x16TM screws through the holes in the mounting
brackets.
Do not move the PDU by holding its mounting brackets, front panel, or terminal cover.When you move it, see the movement
regulations.
(Optional) 1 U STS
3 U PDC-
0038V4ACIOA
3 U UPS 1
3 U UPS 2
(Optional) 3 U battery
pack 1
(Optional) 3 U battery
pack 2
(Optional) 3 U battery
pack 3
(Optional) 3 U battery
pack 4
b
Tower-mounting the PDU
1. The support base length is adjustable. You can add components to increase the length.
2. Exert force to disassemble components in the reverse directions of assembling.
When you change from rack mounting to tower mounting, rotate the logo anticlockwise 90 degrees.
5
Advertisement
Table of Contents
