Table of Contents
Advertisement
Preparations
a
Tools
Get installation tools insulated to prevent electric shocks.
Wire stripper
Protective gloves
Flat-head screwdriver
b
Unpacking and Checking
No.
Visually inspect the PDU appearance for shipping damage. If any shipping damage is found, report it to the carrier
1
immediately.
Check the PDU bar code and ensure that it complies with the order. Check against the delivery list that the types of
2
fittings are complete and correct. If there is any discrepancy, contact your local Huawei office immediately.
c
Device Movement Regulations
Do not move the PDU by holding its mounting brackets, front panel, or terminal cover.When you move it, see the movement
regulations.
< 18 kg (< 40 lb)
Polyvinyl chloride
(PVC) insulation tape
Insulation gloves
Phillips screwdriver
(PH2 x 150 mm or
PH3 x 250 mm)
18–32 kg (40–70 lb)
32–55 kg (70–120 lb)
Heat shrink tubing
Cotton cloth
Electrician's knife
Torque screwdriver
Multimeter
Item
3
(Φ6)
Hydraulic pliers
Cable tie
Crimping tool
> 55 kg (> 120 lb)
Heat gun
Advertisement
Table of Contents
