Checking Personnel Requirements; Installing The Pdc - Huawei PDU8000 User Manual

PDU8000 Modular Precision PDC V2.0
User Manual
Category Tools and Materials
Protective shoes

5.2.3 Checking Personnel Requirements

Construction personnel must have basic knowledge of safe operation, be trained
to master correct operation methods, and have the appropriate job qualifications.
The owner should pay attention to the following items when organizing the
construction personnel to carry out construction work:
●
●
●

5.3 Installing the PDC

Prerequisites
●
●
●
●
●
Context
●
●
Issue 04 (2021-04-13)
NO TE
● This table may not list some tools required at specific sites. Site installation personnel
and technical support personnel should prepare tools based on site requirements.
● Prepare firestop putty for sealing cable holes after cable connection. Huawei does not
provide the firestop putty. The customer needs to purchase it.
Construction personnel have been trained and qualified by Huawei to master
methods for system installation and commissioning, and have obtained work
permits before they begin to install and commission equipment.
The number of construction personnel depends on the project progress and
the installation environment.
Construction personnel have read through the safety precautions and related
product documents before they begin work.
The installation environment has been checked with expected results.
The site has been closed off, and notices have been posted.
The PDC has been unpacked and inspected, and no problems were found.
You have obtained the tools and meters required for the installation.
Installation personnel must be qualified and certified. Power distribution
equipment operators must hold a primary electrician certificate or higher.
A modular precision PDC can be installed on a concrete floor or an ESD floor.
A modular precision PDC can be deployed separately or combined with
another cabinet.
Copyright © Huawei Technologies Co., Ltd.
Firestop putty
5 Installation Guide
-
37