PDU8000 Modular Precision PDC V2.0
User Manual
Figure 7-44 Maint. (3)
7.4.4.1 Upgrading Software
Prerequisites
To upgrade the software, perform the following steps:
Procedure
Step 1 Connect a USB flash drive to the USB Host port. The message A new USB device
is found is displayed.
Step 2 Log in to the Maint. screen as user admin, and tap Upgrade Software to access
the screen.
Figure 7-45 Upgrade Software (1)
Step 3 Tap Upload on the displayed screen, select the upgrade software package, and tap
Next.
Issue 04 (2021-04-13)
Copyright © Huawei Technologies Co., Ltd.
7 MDU Commissioning Guide
99