Huawei PDU8000 User Manual page 78

PDU8000 Modular Precision PDC V2.0
User Manual
●
Figure 6-3 Setting Wizard
Step 6 After the quick settings are complete, if the monitoring page displays alarms, clear
the alarms.
Step 7 Turn on the input switches on the front panel of the PDC.
Step 8 Switch on the output circuit breakers except reserved circuit breakers in the PDC in
sequence to power on the corresponding devices and check whether the
monitoring parameters on the MDU screen are correct.
Step 9 (Optional) Power off the PDC.
1.
2.
3.
----End
Issue 04 (2021-04-13)
If this is not the initial startup and these parameters have been set before, the
system uses the existing settings by default.
NO TE
The user name is admin (preset password: 000001).
NO TE
The figures are for reference only. The actual parameter values prevail.
NO TE
For system security purposes, change the preset password upon first login.
Turn off the output switches in the PDC.
Turn off the input switches in the PDC.
Switch off the upstream power circuit breaker of the PDC.
Copyright © Huawei Technologies Co., Ltd.
6 Commissioning Guide
71