Operating The Compactor; Transporting The Machine - Toro RP-1200D Operator's Manual

1. Engine-run light
2. Battery-charge light
3. Oil-pressure-warning light
3. Move the throttle lever to the Fast position (Figure 11).
Note: The compactor will begin vibrating when the
throttle is set to fast throttle.
Stopping the Engine
1. Move the throttle-control lever to the Slow position
(Figure 11).
2. Push the red button of the engine-shutoff switch for 3
seconds to stop the engine (Figure 14).
1. Red button
3. Model 68075 only: Rotate the key counterclockwise to
the Off position (all indicator lamps will turn off) and
remove key from the starter switch (Figure 13).
Note: When the machine is not running, turn the
starting key to Off position or else the battery may
become fully discharged.
Figure 13
4. Engine-temperature light
5. Engine-preheat light
6. Key
Figure 14

Operating the Compactor

Controlling the Direction of Travel
•
Move the travel-control handle forward to drive the
machine forward (Figure 15).
1. Travel-control handle
(forward travel position)
•
Pull the travel travel-control handle backward to drive the
machine backward (Figure 15).

Transporting the Machine

Lifting equipment capacity: 440 kg (970 lb)
Use the rollcage lift point to lift and transport the machine
with straps or a crane (Figure 16).
g021448
1. Rollcage lift point
12
Figure 15
2. Travel-control handle
(backward travel position)
1
Figure 16