Controls; Specifications; Operation; Checking The Engine-Oil Level - Toro RP-1200D Operator's Manual

Controls

1. Air filter
2. Fuel tank
3. Recoil-start handle
4. Engine-shutoff switch

Specifications

Model number RP-1200D
Length
142 cm (55.9
inches)
Width 60 cm (23.6 inches) 75 cm (29.5 inches)
Height (handle 106 cm (41.5
lowered) inches)
Height (handle 115 cm (45.3
raised) inches)
Weight 350 kg (771.6 lb)
Figure 4
5. Engine indicator lights
(Model 68075 only)
6. Dipstick
7. Start switch (Model 68075
only)
RP-1400D
150 cm (59 inches)
104 cm (40.9
inches)
113 cm (44.5
inches)
440 kg (970 lb)

Operation

Note: Determine the left and right sides of the machine
from the normal operating position.

Checking the Engine-Oil Level

Service Interval: Before each use or daily
Oil type: API CD, CE, CF, CF-4, CG-4 or higher
Refer to the table below to determine the correct oil viscosity
for the ambient air temperature in which the machine is
operated:
1. Pull-start temperature
range
1. Stop the machine on a level surface.
2. Set the throttle to slow, press the red button for the
engine-shutoff switch, and wait for all moving parts
to stop.
3. Clean around the dipstick (Figure 6) so that dirt cannot
fall into the filler hole and damage the engine.
8
Figure 5
2. Electric-start temperature
range