Canon imagePRESS Server F200 Installation And Service Manual page 59

R
EPLACING PARTS
If you remove the CPU from the motherboard in order to install it on a new motherboard,
unpack the new motherboard and remove the protective plastic cover on the CPU socket.
Transfer the protective cover to the CPU socket of the old motherboard to protect the
circuitry. Follow standard ESD precautions while handling the motherboard and all
components.
T
O REMOVE THE COOLING ASSEMBLY
1 Shut down, and then open the imagePRESS Server (see pages
To access the CPU, you must remove the left panel.
2 Remove the CPU fan cable from motherboard connector CPU FAN.
3 Remove the CPU cooling assembly.
Be aware that both the cooling assembly and the CPU may be very hot. You may need to
allow the components to cool before you attempt to remove them.
• Loosen the four screws that secure the cooling assembly to the motherboard. Partially
loosen all the screws before loosening any one screw all the way.
• Lift the cooling assembly off the CPU socket and set it aside.
Screw (1 of 4)
4 Lift the cooling assembly off the CPU socket and set it aside.
33 and 35).
Loosen each
screw to this
position.
59