Warnings - Canon PIXUS 50i Service Manual

2.3 Warnings

(1) Printer (no LED indications)
Low black ink warning 1 (About half of the full amount
remains.)
Low color ink warning 1 (About half of the full amount
remains.)
Low black ink warning 2 (Little ink remains. "!")
Low color ink warning 2 (Little ink remains. "!")
Low black ink warning 3 (An unknown amount remains.
"?")
Low color ink warning 3 (An unknown amount remains.
"?")
Print head temperature rise warning
Protection of excess rise of the print head temperature
Battery low warning
*1: Only when the remaining ink amount detection function is enabled. (When it is disabled, there is no status
display.)
*2: At the warning, the carriage does not move to the ink tank replacement position when the print head cover
is opened.
(2) Battery charger (indicated by the lighting/blinking of the charger's 3 green
LEDs)
LED status
3 LED's light during use of
the printer.
2 LED's light during use of
the printer.
1 LED lights during use of
the printer.
1 LED blinks during use of
the printer.
3 LED's blinks sequentially
during use of the printer.
3 LED's blink during
charging.
3 LED's light during
charging.
2 LED's at both ends blink
alternately.
2 LED's at either end and at
the center blink alternately.
Displayed warning
Warning
Sufficient battery power.
Some battery power used.
Warning of remaining battery
power.
Low battery error.
The battery power is being
checked.
Charging not sufficient.
Charging almost completed.
(not full)
The battery is faulty.
Out of the specified operating
environment temperature
range (5 to 35C),
high temperature of the battery
pack,
faulty battery, or
faulty battery charger.
The status is displayed on the monitor of the
computer connected to the printer
If the print head temperature is high when the
print head cover is opened, the warning is
*2
displayed . When the print head temperature
falls, the warning is released.
If the print head temperature exceeds the
specified limit, a Wait is inserted during
printing,
The status is displayed (except under Windows
95/98/Me) on the monitor of the computer
connected to the printer, and the warning is
indicated by the battery charger LED.
The battery needs to be charged.
The battery needs to be charged. On the
printer, the LED blinks in orange 10 times.
When the battery is fully charged, the 3
LED's are extinguished.
Replace the battery pack.
Use the unit in the specified temperature (5
to 35C),
remove the AC adapter and wait for a while,
replace the battery pack, or
replace the battery charger.
1 - 5
Remarks
*1
.
Remarks