Advertisement
Available languages
Available languages
ND 200 LSN
en
Installation manual
VdS-Klasse C (G 101037)
Installation sequence
1. Press in button until you can disengage the cap by turning it to the left and then lift
it off.
2. Remove the upper section of the housing from the lower section by pressing the
two retaining clips together.
3. Use the lower section of the housing as a template for drilling the fastening holes
(∅ 4 mm). Use an S4 dowel to secure the bottom section of the housing with wood
screws (3 x 25 or 3.5 x 25).
4. Strip the connecting cable approx. 120 mm and, depending on the type of Cable
feeder (surface/recessed), fit it into the lower section of the housing and relieve
the strain by securing it with a cable tie.
Recessed Cable feeder
Cable feeder
for 1 cable
Cable tie for
strain relief
Cable feeder
for 2 cables
5. Panic button connection.
I4
I3
/SA
+U/SR
bLSN2/SM
bLSN1
/AA
aLSN1
I2
LSN
0V
+U
bLSN1/AM
I1
6. Mount the upper section of the housing taking into account the installation location
(use cable feeder or tamper contact as orientation aid) and lock it into the retaining
clips.
Surface Cable feeder
Cable tie for
strain relief
Cable feeder
I5
bLSN2
0V/AR
aLSN2
I6
LSN
0V
+
U
I7
Tamper contact
7. Check for correct functioning of the alarm and tamper contact.
8. -
Place lead seal inside cap. If necessary, press outer edges of lead seal into
cap and turn it to required position.
-
Put cap in place: Locate the triangle so that it covers the marking, fit the
cap in the direction of the arrow and lock in position by turning to the
right.
Seal
Mark
Technical Specifications
Operating voltage (LSN part)
+12 V ... +30 V
Current consumption (line voltage)
Approx. 0.5 mA
Ambient temperature
-0 °C to +50 °C
Ambient climates
DIN 40040 R 14
Protection category
IP 40
Environmental class
II
Housing
- Material
ABS
- Color
- RAL 9002 (housing)
- Gray (cover)
- Weight
70 g
- Dimensions (Ø x H)
81 x 31 mm
Bosch Sicherheitssysteme GmbH
Robert-Koch-Str. 100
D-85521 Ottobrunn
Germany
Telephone
(089) 6290-0
Fax
(089) 6290-1020
www.bosch-securitysystems.com
© Bosch Sicherheitssysteme GmbH, 2009
V4 2009.08
Triangle
2
Advertisement
