Routing power through intermediate unit Attaching the door Making connection in unit Installing the mounting plate Connections for video, control, alarm and relay Using fiber optic ethernet media converter to transmit video and control Bosch Security System 2024-02 | V01 | DOC Installation manual...
Unless qualified, do not attempt to service a damaged device yourself. Refer all servicing to qualified service personnel. – Install in accordance with the manufacturer's instructions in accordance with applicable local codes. – Use only attachments/accessories specified by the manufacturer. 2024-02 | V01 | DOC Bosch Security System Installation manual...
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Responsible party Bosch Security Systems, LLC 130 Perinton Parkway 14450 Fairport, NY, USA Bosch Security System...
Page 6
| Safety and security information Surveillance cabinet For more information please contact the nearest Bosch Security Systems location or visit: www.boschsecurity.us For use in China: CHINA ROHS DISCLOSURE TABLE Surveillance cabinets (NBA-7070-PA0, NBA-7070-PA1, NBA-7070-PA2) Hazardous substance table according to SJ/T 11364-2014...
– Verify that all the parts listed in the Parts List below are included. If any items are missing, notify your Sales or Customer Service Representative from Bosch Security Systems. – Do not use this product if any component appears to be damaged. Please contact from Bosch Security Systems in the event of damaged goods.
Page 8
| Unpacking Surveillance cabinet – Socket wrench and 9/16-in. socket – Banding tool (Bosch P/N TC9311PM3T) - if installing a mast (pole) mount 2024-02 | V01 | DOC Bosch Security System Installation manual...
Place the unit into the optional Trim Skirt. Mount the unit to the mounting surface. – For a Wall installation: Use 4 corrosion-resistant, stainless steel studs (not supplied). Then proceed to Step 6 below. Bosch Security System 2024-02 | V01 | DOC Installation manual...
(not supplied) for a mast or pole installation. Follow the instructions provided with the banding tool to securely mount the Pole mount adapter to the pole. Contact your Bosch Sales Representative to order Banding Tool P/N TC9311PM3T. Attach 20 mm (3/4 inch) NPS watertight pipe fittings (not supplied) to the bottom or back holes of the unit for the routing of the power, video, and control data wires.
Page 11
VAC / 230 VAC) P107 Connector; 24 VAC to camera In/Out; 15 mm (1/2 inch) NPS Fitting Ethernet connector Left conduit fitting. Use for power wires 20 mm (3/4 inch) NPS Fitting Bosch Security System 2024-02 | V01 | DOC Installation manual...
A type PA1 or PA2 unit. – The main power supply connected to the P101 connector and to the grounding screw. – The 24 VAC power out wire connected to the P107 heater power connectors. 2024-02 | V01 | DOC Bosch Security System Installation manual...
Page 13
For the correct connection of the incoming high voltage and the outgoing low voltage wires, refer to this table: Connector Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Ground Grounding screw Bosch Security System 2024-02 | V01 | DOC Installation manual...
Page 14
Connect the ground wire to the grounding screw. Connect the 24 VAC power cable to the P107 Power Out connector to route the 24 VAC power supply to the PA0 unit. 2024-02 | V01 | DOC Bosch Security System Installation manual...
Page 15
Attach the supplied 3-pin power plug to the incoming 24 VAC power supply wires in the unit, as illustrated below. Bosch Security System 2024-02 | V01 | DOC Installation manual...
Page 16
| Installing the Surveillance cabinet Surveillance cabinet Connect the 24 VAC power supply wires in the NBA-7070-PA0 unit Incoming 24 VAC power supply wires (from PA1 or PA2 unit) Ground wire P101 connector 2024-02 | V01 | DOC Bosch Security System...
Connect the ground wire to the grounding screw on the left side of the unit. Connect all wires from the door to their mating wires in the unit. (For Fiber Optic models: connect the 6-pin Control to Dome Plug to the P106 connector.) Bosch Security System 2024-02 | V01 | DOC Installation manual...
TOP indicator facing upwards. Align your mounting plate with the 4” square box slots. Attach the mounting plate to the surface with 4 screws. Tighten the screws (3 Nm) to secure. 2024-02 | V01 | DOC Bosch Security System Installation manual...
Page 19
Surveillance cabinet Installing the Surveillance cabinet | en For further information on camera installation, refer to the device’s Installation manual and/or Quick installation guide. Bosch Security System 2024-02 | V01 | DOC Installation manual...
8-10/125 μm SMF. Must meet or exceed fiber standard ITU-T G.652. Maximum Distance 60 km (37.3 miles) Requirement Media converter receiver (CNFE2MC/IN) at controller end of system Terminal Connection Duplex LC or Single SC 2024-02 | V01 | DOC Bosch Security System Installation manual...
Page 21
Surveillance cabinet Connections for video, control, alarm and relay | Bosch Security System 2024-02 | V01 | DOC Installation manual...
Page 22
| Connections for video, control, alarm and relay Surveillance cabinet 2024-02 | V01 | DOC Bosch Security System Installation manual...