Port Security Command Options And Operation; Port Security Display Options - HP ProCurve 6400cl Series Access Security Manual

Configuring and Monitoring Port Security
Port Security
N o t e
11-8

Port Security Command Options and Operation

Port Security Commands Used in This Section
show port-security
show mac-address
port-security
< port-list >
learn-mode
address-limit
mac-address
action
clear-intrusion-flag
no port-security
This section describes the CLI port security command and how the switch
acquires and maintains authorized addresses.
Use the global configuration level to execute port-security configuration
commands.

Port Security Display Options

You can use the CLI to display the current port-security settings and to list the
currently authorized MAC addresses the switch detects on one or more ports.
Displaying Port Security Settings.
Syntax: show port-security
show port-security [e] <port number>
show port-security [e] [<port number>-<port number]. . .[,<port number>]
The CLI uses the same command to provide two types of port
security listings:
• All ports on the switch with their Learn Mode and (alarm)
Action
• Only the specified ports with their Learn Mode, Address
Limit, (alarm) Action, and Authorized Addresses
Without port parameters,
Control settings for all ports on a switch.
11-8
11-11
11-11
11-11
11-14
11-14
11-15
11-15
11-15
show port-security displays Operating