Installing The Tv Stand (L46S3D13N And L55S3D13N) - Pioneer L40S3D13N Instruction Manual

Installing the TV Stand (L46S3D13N and L55S3D13N)

The LCD display is very fragile, and must be protected at all times when installing and removing the TV stand. Be sure that
no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO NOT exert
pressure on the front of the TV at any time because the screen could crack.
1. Disconnect all cables connected to the TV.
2. Lay the TV down on a flat surface preferably a table with the back side facing up. Make sure the neck of the TV stand over
hangs the edge of the table. Please make sure a soft cushioned material (such as a pillow or thick piece of foam) is placed
beneath the screen.
3. Carefully place the glass stand onto the neck of the stand. Then fix into position using the 3 screws provided as shown.
4. The stand for models L46S3D13 and L55S3D13 have a
swivel base to make angling the TV easier.
2
Preparation
7
GB