Advertisement
STANDARD INSTALLATION INSTRUCTIONS
STEP 1 - CABINET OR WALL OPENING
The opening in the wall or cabinet must be within the
following dimensions:
OPENING
RK49S27F
1
14
/
" - 15
2
Height (A)
(368.3 - 400 mm)
11
24
/
" - 25
16
Width (B)
(627.1 - 643 mm)
Minimum
20" (508 mm)
Depth (C)
Outlet should NOT be in the shaded area as indicated in
Figure 1.
A
B
NOTES
• Please allow minimum 3" wood gap between the
microwave oven cutout and the appliance cutout below
the microwave oven. See Figure 2.
Microwave cutout
Wall oven cutout
RK49S30F
3
1
3
/
"
14
/
" - 15
/
4
2
(368.3 - 400 mm)
5
13
/
"
24
/
" - 26
16
16
(630.2 - 679.5 mm)
20" (508 mm)
C
FIGURE 1
3" Min.
FIGURE 2
• If the dimension of DEPTH (C) is more than 21" (533.4
mm), the outlet location may be any area on the rear wall.
• The floor of the opening should be constructed of
plywood strong enough to support the weight of the
oven and floor load (about 100 pounds/45 kg). The floor
should be level and 90˚ with the face of the cabinet for
"
4
proper installation and operation of the oven. Be sure to
check the local building code as it may require that the
3
opening be enclosed with sides, ceiling and rear partition.
/
"
4
The proper functioning of the oven does not require the
enclosure.
STEP 2 - EXHAUST DUCT ASSEMBLY INSTALLATION
1. Place the EXHAUST DUCT ASSEMBLY in the center of
the opening. Align the front edge of the duct with the front
of the cabinet.
2. Secure the EXHAUST DUCT ASSEMBLY with 2 SCREWS
D. See Figure 3.
Screw D
C
L
STEP 3 - FRAME INSTALLATION
1. Place the oven adjacent to the wall or cabinet opening.
Plug the power cord into the electrical outlet.
2. Carefully guide the assembled oven into the prepared
opening. Slide the oven onto the EXHAUST DUCT
ASSEMBLY. See Figure 4. Avoid pinching the cord
between the oven and the wall. Adjust the position of
the oven so that the feet of the oven are fitted into the
recesses of the EXHAUST DUCT ASSEMBLY and the
door opens properly. See Figure 5.
2
Screw D
Exhaust duct
assembly, align
to front edge of
cabinet
FIGURE 3
Advertisement
