Silvercrest SHLF 2000 C1 Operating Instructions And Safety Instructions page 34

SilverCrest SHLF 2000 C1
 Unplug the mains plug from the mains socket if the fan heater
is not working properly, not in use, during thunderstorms and
before cleaning.
 Make sure that the power cable (9) cannot be damaged by
sharp edges or hot spots.
 Make sure that the power cable (9) cannot become crushed
or squashed.
 Do not modify the fan heater in any way.
 If the power cable (9) is damaged, it must be replaced by
the manufacturer, its customer service or a similarly qualified
person, in order to avoid any possible danger. Never use
adapter plugs or extension cables and do not tamper with
the power cable (9)!
Risk of fire!
 Always place the fan heater on an even, heat-resistant
surface away from heat sources and combustible materials,
liquids or gases. Leave clearance of at least 1 m on all sides.
 The fan heater is not designed to be operated with an
external timer or a separate remote control system.
 Always unwind all the power cable (9).
 The fan heater must not be covered and no objects must be
inserted into the air inlet grille (6) or the air outlet grille (2) to
avoid overheating.
 In order to avoid a build-up of heat, the air needs to be able
to go in and out freely.
 When the device is in use, burnable objects such as curtains
or paper should be kept away from the fan heater.
32 - English