Installing Projector Station For Network Presentation; Starting Projector Station For Network Presentation; Projecting An Image - Sony VPL-PHZ10 Operating Instructions Manual

Installing Projector Station for
Network Presentation
1
Close all running applications.
2
Open the downloaded file.
For Windows
Double-click the .exe file. When the
message "User Account Control" is
displayed, click "Allow" or "Yes."
For Mac
Double-click the .pkg file.
3
Follow the on-screen instructions
to install the software.
Starting Projector Station for
Network Presentation
1
Connect the projector to a
network.
For a wired connection, connect
the projector by a LAN cable, then
make the network settings. For
details, see "LAN Settings"
(page 34) or "Setting the LAN
Network of the projector"
(page 45).
For a wireless connection, see "LAN
terminal" (page 11) or "USB
terminal (Type A) (
Also check "WLAN Settings"
(page 34).
2
Turn on the projector.
Select "Network" as the input
source (page 17).
3
When you start Projector Station for
Network Presentation for the first time
after installing to your computer, the
connection guidance window will be
displayed. This window gives you the
information for the necessary settings
for connection. Be sure to read it
thoroughly. When starting the
application after the first time, the
connection method selection window
will be displayed first. You can check
the connection guidance window
anytime from the connection method
selection window.
For Windows
Connection guidance window
)" (page 11).
1
Using Presentation Function via Network
Start Projector Station for
Network Presentation.
For Windows
Select [Start]-[All Programs]-
[Projector Station for Network
Presentation] on the computer.
For Mac
Double-click [Projector Station for
Network Presentation] in
Applications folder.

Projecting an Image

Select the connection method.
Refer to the network information
on the projected screen of the
projector and select "LAN Mode" or
"AP Mode."
55