Connection Settings; Using The Controller - Sony VPL-PHZ10 Operating Instructions Manual

Wireless password input window
Notes
• When a projector is connected to a
network via a wireless connection,
if the "SSID" is changed from the
factory default, it may not be
found.
• When a projector is connected to a
network via a wired connection,
depending on the network
environment, it may not be found.
3
Click "Connect".
When you click the "Connect"
button, a controller will be
displayed on the screen of the
computer and the computer starts
projecting an image (page 57). If
another user is projecting an
image, click
If no users are projecting an image,
the controller appears on the
screen and starts projecting an
image.
Notes
• Display related settings (such as
your computer's resolution)
change when the application is
started.
• If "Input" is set to other than
"Network" (page 17), the image will
not start being projected even after
you press the "Connect" button. If
you want to project the image,
select "Network" to change the
display status.
to start projecting.

Connection Settings

Item
IP Address Input the IP Address.
List the IP addresses of
the projectors on the
network and IP
addresses of projectors
connected so far, as
candidates.
SSID Input SSID.
List the peripheral SSIDs
and SSIDs of projectors
connected to the
computer so far, as
candidates.
Update Search the network
button again and update the
candidate list of the
projectors.
Wireless Input the wireless
Password password of the SSID. If
open system
authentication is used,
input of the wireless
password is
unnecessary.
CODE Input the Connection
CODE displayed on the
screen of the projector.
Connect Connect to the projector
that is set in the items
above and start to
project an image.

Using the Controller

For Windows
Network
Presentation
CODE: 1234
User 000001
8
Using Presentation Function via Network
Item descriptions
57