Advertisement
Line Pull And Capacity Per Layer
1
layer of Cable
lb
2500
Rated
line Pull
Kg
1135
Ft
7.9
Cable
Capacity
M
2.4
5. INSTALLATION
5.1.
WINCH INSTALLATION
5.1.1.
Mount the winch on the vehicle or other fixed installation by using M8 x1.25 x 30mm screws, M8 nuts, Ø8mm flat and spring washers.
WARNING! Mount the winch so that the wire rope underwinds. Improper mounting could damage your winch and void your warranty.
‰
See fig.4.
5.2.
ELECTRICAL INSTALLATION (REfER TO fIG.5)
WARNING! These winches work on standard automotive 12V dC only, never connect to a 230V mains, as solenoid burnout or fatal
‰
shock may occur.
NOTE:
Make sure the battery is disconnected.
5.2.1.
Plug the switch plug into the switch socket. Plug the green wire into the green wire on the relay block and the black wire into its connector
on the relay block.
5.2.2.
Connect the red wire to the red marked terminal on the relay block and to the positive (+) terminal of the battery. Connect the black wire to
the negative (-) terminal of the battery.
© Jack Sealey limited
2
3
4
5
2033
1713
1480
1303
922
777
671
591
17.4
28.2
40.7
45.9
5.3
8.6
12.4
14
Original Language Version
Line Pull And Capacity Per Layer
layer of Cable
Rated line Pull
Kg
Cable Capacity
fig.4
fig.5
ATV1135.V2, ATV2040.V2 Issue 2 (HF) 01/03/19
1
2
lb
4500
3691
3129
2043
1676
1421
Ft
11.5
25.6
42.6
M
3.5
7.8
12.9
3
4
2715
1233
55.8
17
Advertisement
