Clearing A Clogged Discharge Chute; Operating Tips; Preventing Freeze-Up After Use - Toro Flex-Force Power System 39901 Operator's Manual

Clearing a Clogged
Discharge Chute
WARNING
Contacting a rotating rotor with your hands
inside the discharge chute could cause
serious personal injury.
Never use your hands to clean out the
discharge chute.
1. Shut off the motor, remove the electric-start
button, and remove the battery pack.
2. Wait 10 seconds to ensure that the rotor blades
have stopped rotating.
3. Always use a clean-out tool, not your hands, to
clear the chute.

Operating Tips

WARNING
The rotor can throw stones, toys, and other
foreign objects and cause serious personal
injury to you or bystanders.
• Keep the area to be cleared free of all
objects that the rotor blades could pick up
and throw.
• Keep all children and pets away from the
area of operation.
•
Remove the snow as soon as possible after it falls.
•
Push the machine forward, but allow it to work at
its own pace.
•
Overlap each swath to ensure complete snow
removal.
•
Discharge the snow downwind whenever possible.
Preventing Freeze-up after
Use
•
Let the motor run for a few minutes to prevent
moving parts from freezing. Shut off the machine,
wait for all moving parts to stop, and remove ice
and snow from the machine.
•
Clean off any snow and ice from the base of the
chute.
•
Rotate the discharge chute left and right to free
it from any ice buildup.
•
In snowy and cold conditions, some controls and
moving parts may freeze. Do not use excessive
force when trying to operate frozen controls. If you
have difficulty operating any control or part, start
the machine and let it run for a few minutes.
14