LG ESS HB 10.0 Installation Manual page 69

6 Uninstallation & Return
6.1 Return/replacement instructions
6.1.1 Uninstallation from the wall
A Switch OFF the Inverter before starting the
uninstallation of the battery pack.
B Loosen the two screws (marked position) at
the bottom of wiring box cover.
C Pull the wiring box cover to remove it.
D Switch off the circuit breaker and make sure
that is in the OFF position. After that turn off
the disconnect switch.
CAUTION
MUST follow the turn off procedure. And do not
turn off the disconnect switch while the battery is
in operation.
E Loosen the screw (marked position), and
remove the transparent protection cover.
Uninstallation & Return
33
6