Advertisement
5. Attach the pads to the fuel-tank straps
Figure 6
1. New fuel-tank straps
2. Pad
6. Secure the new fuel tank to the fuel-tank tray using the
straps and 4 flange nuts (1/4 inch) as shown in
7. Attach the hose adapter and short hose to the inline
fuel filter and secure it to the bottom of the carbon
canister
(Figure
7).
Figure 7
1. Short hose
2. Hose adapter
(Figure
6).
3. New fuel tank
4. Flange nut (1/4 inch)
Figure
3. Inline fuel-filter hose
8. Attach the 1.6 m (65 inch) hose to the fuel tank and
fuel filter using the previously removed hose clamps as
shown in
Figure
Note: Ensure that the hose is routed through the hole
in the frame.
1. Fuel filter
2. Carbon canister
9. Attach the 1.5 m (61 inch) hose to the fuel tank and
carbon canister using the previously removed hose
clamps as shown in
Note: Shorten the hose if it is too long for your
machine.
10. Attach the vent line hose to the carbon canister using
the previously removed hose clamp
6.
1. Vent line hose
3
8.
Figure 8
3. 1.5 m (61 inch) fuel hose
4. 1.6 m (65 inch) fuel hose
Figure
8.
(Figure
Figure 9
9).
Advertisement
