Wi-Fi Connection - Philips 3000i Series User Manual

Wi-Fi connection

Setting up the Wi-Fi connection for the first time
1
Download and install the Philips "Clean Home+" app from the
App Store or Google Play�
2
Put the plug of the air purifier in the power socket and touch
to turn on the air purifier�
» The Wi-Fi indicator
3
Make sure that your smartphone or tablet is successfully connected to
your Wi-Fi network�
4
Launch the "Clean Home+" app and click on "Connect a New Device"
or press the "+" button on the top of the screen� Follow the onscreen
instructions to connect the air purifier to your network�
Note:
• This instruction is only valid when the air purifier is being set up for the first
time� If the network has changed or the setup needs to be performed again,
see Chapter "Reset the Wi-Fi connection" on page 10�
• If you want to connect more than one air purifier to your smartphone or
tablet, you have to do this one by one�
• Make sure that the distance between your smartphone or tablet and the air
purifier is less than 10 m without any obstructions�
• This App supports the latest versions of Android and iOS� Please check
www�philips�com/cleanhome for the latest update of supported operating
systems and devices�
Reset the Wi-Fi connection
Note:
• Reset the Wi-Fi connection when your default network has changed�
1
Put the plug of the air purifier in the power socket and touch
the air purifier�
2
Touch and
» The air purifier goes to pairing mode�
» The Wi-Fi indicator
3
Follow the steps 3-4 in "Setting up the Wi-Fi connection for the first time"
section�
EN
10
blinks orange for the first time�
simultaneously for 3 seconds until you hear a beep�
blinks orange�
to turn on