Philips 5000 Series Manual page 11

2
1
2
1
Removing the rechargeable battery
Only remove the rechargeable battery if it is completely empty.
1 Disconnect the appliance from the mains and let the appliance
operate until the motor stops.
2 Press the release button (1) and remove the cutting unit (2).
3 Insert the screwdriver between the motor unit and the back panel of
the appliance. Press down the screwdriver as far as it will go
4 Tilt the handle of the screwdriver downwards (1) and separate the
back panel from the appliance (2).
5 Remove the side panels. Pull the bottom part of the printed circuit
board with the rechargeable batteries attached from the appliance.
6 Cut the wires to separate the rechargeable batteries from the
appliance.
Do not connect the appliance to the mains again after you have opened it.
ENGLISH
11