Canceling A Cycle - Whirlpool 915 Series Use And Care Manual

CYCLE
LIGHT
Single wash for
prerinsed or lightly
soiled loads.
l
Select Hi-Temp Wash to heat water
in the main wash (marked +).
l
The water heats to 140°F in the final
rinse (marked ++).
RINSE-WASH LATER
For rinsing a
few items to be
washed 1 or
more days later.
l
Do not use detergent.
On 900 Model Series:
l
The water heats to 140°F in the
final rinse (marked 7).
l
Select the Air Dry Option when
using this cycle.
On 915 Model Series:
l
Air Dry is automatically selected.
A "J" shows what each cycle includes
MAIN
FINAL
WASH RINSE WASH RINSE RINSE DRY
J' J
J++ J
J Jt
CYCLE
TIME
,Minutes
60*
16"
- Cycle time includes dry time and may be longer depending on Ihe temperature 01 water entering the dishwasher. The cooler the water, the longer the
cycle lime If the water is already hol enough. the cycle times will be as shown. The cycle control knob does not move while water is being heated.
**Cycle tune may be longer on 900 Model Series depending on the temperature of water enlering the dishwasher.
Canceling a cycle
You can cancel a cycle at any time.
1. Turn the cycle control knob slowly
clockwise until you hear water draining.
Let the dishwasher drain completely.
2. Open the door.
3. Turn the cycle control knob to Off.
15