About This Document - Siemens FT2010 Operation Manual

1 About this document

Target group
System owner
Commissioning personnel
Operating personnel
Maintenance personnel
Building Technologies
Fire Safety
Goal and purpose
This document describes the operation of the floor repeater terminal FT2010 in a
fire detection system. The reader shall become familiar with the possible
indications and operating functions on the terminal, as well as with the functionality
of the terminal in the overall system. This understanding makes an adequate
behaviour possible in the event of fire or fault.
Scope
This document applies to the floor repeater terminal type FT2010.
Target groups
The information in this document is intended for the following target groups:
Activity
● According to EN 50110-1,
'nominated person with the overall
responsibility to ensure the safe
operation of the electrical
installation by setting rules and
organisation or framework.'
● Configures the product at the place
of installation according to
customer-specific requirements.
● Checks the product operability and
releases the product for use by the
operator.
● Searches for and corrects
malfunctions.
● Carries out procedures to correctly
operate the product.
● Carries out all maintenance work.
● Checks that the products are in
perfect working order.
● Searches for and corrects
malfunctions.
Source language and reference document
● The source/original language of this document is German (de).
● The reference version of this document is the international version in English.
The international version is not localized.
About this document
Displays used in document
Qualification
● 'This person can be the owner,
employer, proprietor or a delegated
person.'
● 'Some of these duties can be
delegated to others as required. For
large or complex electrical
installations or networks, the duties
can be delegated for parts of the
installations or the network.'
● Has obtained suitable specialist
training for the function and for the
products.
● Has attended the training courses
for commissioning personnel.
● No particular basic training is
needed.
● Has been instructed by the
commissioning personnel.
● Has obtained suitable specialist
training for the function and for the
products.
1
5 | 40
009310_l_en_--
2018-08-29