5.
Set the image settings, and click [Next>].
•
Clicking [<Back] takes you back to the previous page.
•
Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Note
•
If you enable the Lens Position When Triggered setting, buffer/transfer of
the post-trigger image starts after the camera turns to the specified
position.
Setting
Lens Position When
Triggered
6.
Set the image settings, and click [Next>].
•
Clicking [<Back] takes you back to the previous page.
•
Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Setting
Image Resolution
•
Set the direction to move the lens to the home position,
alarm position (see page 30) or Preset 1–20 (see page
31) when motion is detected.
•
Select an image resolution (640 × 480, 320 × 240
(default) or 160 × 120 pixels) for the buffer/transfer.
Description
Description
Operating Instructions
121