Setting
Image
Resolution
Image Quality
6.
Set the image buffer frequency, and click [Next>].
•
Clicking [<Back] takes you back to the previous page.
•
Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Note
•
Due to the network environment, object, the number of simultaneous
accesses, enabling IPsec or SD memory recording, the camera may not
record number of images that you set. In this case, set the image buffer
frequency longer.
•
Set Every [1 s], buffer [1] images for the SD memory recording.
Setting
Image Buffer
Frequency
•
Select an image resolution (640 x 480, 320 x 240 (default)
or 160 x 120 pixels) for the buffer/transfer.
•
Select the image quality.
[Favor Clarity] optimizes for good quality.
[Standard] offers standard quality.
[Favor Motion] optimizes for enhanced motion.
[Mobile Phone] is for a transfer to a cell phone.
Note
•
640 x 480 pixels cannot be set for a transfer to a cell phone.
•
Select an image buffer frequency to buffer or transfer the
image. (1 image per hour—30 images per second)
Description
Description
Operating Instructions
99