Important Notice - NEC SL 1000 Technical Training Manual

Important Notice

 To avoid shock or damage, do not plug in or turn the system on before completing the
installation process.
 Avoid working with the KSU during electrical storms.
 Use only commercial AC Power to prevent shock or fire.
 Use the power cord supplied for the KSU.
 Do NOT bundle AC Power cords together, the cords may over heat.
 Make sure the KSU has proper Earth Ground.
 The system should be "Wall-Mounting" only.
 A dedicated 110/240VAC circuit located within 2 meters of the KSU is required. A
separate AC outlet is necessary for each KSU.
 Meeting established environmental standards maximizes the life of the system.
Be sure the site is
 In direct sunlight or in hot, cold or humid places.
 In dusty areas or in areas where sulfuric gases are produced.
 In places where shocks or vibrations are frequent or strong.
 In places where water or other fluids comes in contact with the equipment.
 In areas near high-frequency machines or electric welders.
 Near computers, telexes, microwaves, air conditioners, etc.
 Near radio antennas (including short-wave)
Page 3
© NEC Corporation 2009
บริ ษ ั ท โปรเฟสชั � น แนล พี เ อบี เ อ็ ก ซ์ จํ า กั ด โทร. 02-519-1718 Hotline. 084-920-5065
<No Power-ON Maintenance>
NOT :
NEC Confidential