Grounding
KSU Grounding
• The "ETH" lug is located near Power supply unit on each KSU.
• Connect " ETH" lug to the verified Earth Ground point by using 14AWG (2.0mm) wire.
Grounding must be done each KSU respectively.
Grounding is required not only for system protection
but also for Caller-ID detection.
Page 7
© NEC Corporation 2009
บริ ษ ั ท โปรเฟสชั � น แนล พี เ อบี เ อ็ ก ซ์ จํ า กั ด โทร. 02-519-1718 Hotline. 084-920-5065
NEC Confidential