Philips HU5931 Quick Start Manual

Monet HU5931 EN
NanoCloud technology evenly distributes invisible water vapour into your
room.
In dry conditions moisture from the humidi er will be absorbed by walls,
furniture, and other items in your room. Ventilation of dry outside air will also
increase the time it takes to reach the target humidity.
To optimize humidi cation and puri cation performance, it's recommended
to close doors and windows during use.
Control
OUTLINE
Child Timer Fan Power Humidity
lock speed
Long press 3 seconds
Display
Replace Low water Clean
lter alert
lter alert level alert
2-digit display
Humidity level
Temperature
reached
Humidity level
Temperature Light Reset
level on/o on/o
Timer Auto Turbo
on
mode mode
Humidity level
not reached
Humidity light ring
(with cartridge)
Maintenance
Water tank
Humidi cation
wick
Wick support
Anti-bacteria cartridge
EVERY
Rinse the water tank, the water tray and the
WEEK NanoCloud rotray humidi cation wick.
When display shows
2 hours
Clean the pre- lter and wick Descale the wick with the water and white
vinegar or citric acid, rinse with water and air dry.
When display shows
1
Time to replace NanoProtect lter
!
Press for 3 seconds to reset after cleaning or replacing accessory
The lter may produce smell after being used for a while because of the
absorption of indoor air. Remove the lter and place it where it has direct
sunlight and ventilation for several hours. Re-install and try using it again.
If the odor remains, please replace the lter.
90x127mm
Pre- lter
NanoProtect lter
Time to replace wick
4241 210 98591