D-Link DIR-L1900 Quick Installation Manual

Quick Installation Guide
DIR-L1900
High-Performance Mesh Wi-Fi Router
INSTALLATION
OPTION 1
D-LINK WI-FI APP SETUP
1
Download the D-Link Wi-Fi app and launch it.
/
D-Link Wi-Fi
2 Tap Install New Device. Scan the QR code on the Quick
Installation Card. Follow the on-screen instructions to complete
/
the setup. NOTE: If you are setting up a second DIR-L1900 for a
Mesh Network, see the "D-Link Wi-Fi Mesh" section on the back
side of this QIG.
You're all good to go! Once the setup is complete, you can connect your devices using the Wi-Fi name (SSID) and password that you
created during the setup. Enjoy the Internet!
D-Link Wi-Fi
Model Name: DEVICE
Wi-Fi Name: dlink-XXXX
SETUP QR CODE
Password: XXXXXXXX
S/N: 123456789
PACKAGE CONTENTS
• DIR-L1900 || High-Performance Mesh Wi-Fi Router
• Power Adapter
• Ethernet Cable
• Quick Installation Guide
• Quick Installation Card
OPTION 2
WEB BROWSER SETUP
1
Plug the router into a power source. Make sure that the power button
is on. Wait for the status LED to either flash orange or turn
/
solid white.
2
Connect your computer to the Wi-Fi details printed on the Quick
Installation Card. Type http://dlinkrouter.local./ into a web
/
browser. You will be asked for your Admin Password. By default
this password is "password". Type that in and follow the on-screen
instructions to complete the setup.
NOTE: If you are setting up a second
DIR-L1900 for a Mesh Network, see the
"D-Link Wi-Fi Mesh" section on the back
Wi-Fi Name: dlink-XXXX
Wi-Fi Password: XXXXXXXX
side of this QIG.
http://dlinkrouter.local./
dlink-xxxx
Connect
xxxxxxxxx
xxxxxxxxx
I I I I
Admin Password = password
Admin Password: