Table of Contents
Advertisement
Available languages
Available languages
For both variations – "YPbPr" and "YUV"– you will need
•
an audio cinch cable (not supplied)
•
an YUV cable (not supplied) These can be obtained from your dealer.
On the rear panel of the DVD player you will find the three so called "Com-
ponent Colour Out" sockets Y, Pb/Cb and Pr/Cr.
Connecting the DVD player via component signal:
Y
•
Connect the sockets
(green),
corresponding sockets on the television.
•
Connect the audio output sockets
player to the corresponding audio inputs on the television with an audio
cinch cable.
Make sure that the red and white colour markings correspond.
•
For playback select the matching channel on your television Check with
the television's instruction manual on how you can set the AV channel.
•
In the OSD menu select the menu item Video/Video-Ausgang/Component
and/or P-Scan.
On this topic see also chapter 10.3 "Video settings: Video output.
PB/CB
PR/CR
(blue), and
(red) with the
FL/RL
on the rear panel of the DVD
9. Connecting audio components to
the DVD player
Besides sound playback of DVDs, VCDs/S-VCDs and audio and MP3-CDs
via the speaker of the television, to which the DVD player is connected, sound can
also be played back via external audio components such as a HiFi system,
Dolby digital/DTS receiver or a surround sound system.
9.1 Requirements for the connection of a HiFi system
In order to enjoy a full sound experience when playing DVDs with the DVD
player you can connect a HiFi system to the player. Before connecting check
with the HiFi system's instruction manual to verify...
•
if the HiFi system is suitable for connection to a DVD player.
•
if the HiFi system is equipped with cinch sockets; if yes, you can connect
the HiFi system to the DVD player via cinch cables.
Connecting a HiFi system:
•
Connect the audio output sockets
player to the corresponding audio inputs on the HiFi system with an
audio cinch cable.
Make sure that the red and white colour markings correspond.
•
Check with the instruction manual which settings on the HiFi system may
be necessary in order to reproduce sound via the HiFi system during the
playback of a DVD, VCD/S-VCD, Audio or MP3-CD from the DVD player.
Note:
For an optimal sound experience place your HiFi system's loud speakers
to the left and to the right of the television, on which you connected the
DVD player.
If you connected the DVD player to the television via a Scart cable the Audio
signal will be transmitted via the cinch cable to your HiFi system as well as via
the Scart cable to the television. In this case, set the volume of the television to
the lowest value.
9.2 Connecting digital audio components via digital cables
In order to enjoy sound playback throughout the room from correspondingly
equipped DVDs (recognizable by the Dolby Digital or DTS logos), you can
connect the DVD player to a digital audio component, for example, a Dolby
Digital or DTS receiver or a suitable surround sound system.
you can purchase the necessary cables for the hereafter described connection
variants from your dealer.
Firstly check with the digital components instruction manual to see if it allows
for connection to the DVD player...
•
via a coaxial cable
•
or via an optical cable.
- 54 -
FL/RL
on the rear panel of the DVD
Advertisement
Chapters
Table of Contents
